會員登陸
建材CE認證
CE認證標準
其他測試標準
聯系我們
電話:(+86)025-8658 3475
傳真:(+86)025-8658 3457
郵箱:info@hksmartps.com
網址:http://www.1jia3.com
IMO FTPC Part 5:表面可燃性測試
IMO FTPC Part 5:表面可燃性測試-IMO Res.A.653(16) & IMO Res.A.687(17)
IMO FTPC Part 5: Test for surface flammability 表面材料可燃性測試
Field of application 適用范圍
Surface materials for bulkheads and ceilings and similar exposed surfaces, floor coverings艙壁、襯板、天花板和甲板表面
等級評估:
Bulkhead, wall and ceiling linings |
Floor coverings |
CFE Qsb Qt Qp Kw/m2 MJ/m2 MJ kW |
CFE Qsb Qt Qp Kw/m2 MJ/m2 MJ kW |
≥20 ≥1.5 ≤0.7 ≤4.0 |
≥7.0 ≥0.25 ≤2.0 ≤10.0 |
其中 CFE: Critical flux at extinguishment 熄滅時臨界熱輻射量
Qsb: Heat for sustained burning 持續燃燒熱值
Qt: Total heat release 熱釋放總值
Qp: Peak heat release rate 熱釋放峰值
測試方法
A specimen with dimensions 800mm x 155mm is exposed in vertical position to a graded radiant heat flux field supplied by a gas-fired radiant panel. The angle between the specimen and the radiant panel is 15°.
The distribution of the heat flux field along the specimen is calibrated at fixed positions 100 mm apart. The values of the heat flux field at these positions as specified in the standard are between 1,5 and 50,5 kW/m2.
Gases given off from the specimen are ignited by a pilot flame from a burner which is situated at the end of the specimen which is nearest to the radiant panel. The combustion gases are drawn off through a fume stack above the specimen.
The test is terminated when any one of the following is applicable;
- The specimen fails to ignite after a 10 minute exposure
- Three minutes have pass since all flaming from the specimen ceased.
- Flaming reaches the end of the specimen or self extinguishes and thus ceases to progress along the specimen. This criterion is only used when heat release measurements are not being made.
- In the case of floorcoverings, the test shall be terminated after 40 minutes.
IMO MSC 61(67) FTPC – 相關測試標準
IMO FTPC Part 1: Non-combustibility test 不燃物測試
IMO FTPC Part 2: Smoke and toxicity test 煙霧毒性測試
IMO FTPC Part 4: Test for fire door control systems 防火門控制系統測試
IMO FTPC Part 5: Test for surface flammability 表面燃燒試驗
IMO FTPC Part 6: Test for primary deck coverings 主要甲板覆蓋物測試
IMO FTPC Part 7: Test for vertically supported textiles and films 垂直放置的紡織物料和覆膜測試
IMO FTPC Part 8: Test for upholstered furniture 軟墊家具測試
IMO FTPC Part 9: Test for bedding components 床上用品測試
ISO 9705 and ISO 5660: Test for fire-restricting materials for high-speed craft 高速船舶防火材料
全國免費咨詢電話: 400-603-6575